6–4 User’s Guide
Making Your Data Connections
DNS servers, tap Advanced, then tap the Name Servers tab.
Select Use specific server addresses, and then enter the DNS
addresses provided by your GPRS service provider. Tap OK.
9. Tap Finish.
Connecting to the GPRS Network
1. From the Start menu, tap Settings > Connections tab >
Connections icon.
2. In the drop-down list, select the service you want to use.
3. Tap Connect.
Your service provider can provide additional information on
connecting to the Internet using GPRS.
Creating a GSM Connection
Global System for Mobile Communications (GSM) technology is
used to make mobile phone calls and provide data service with
roaming capabilities throughout the world.
To create a cellular GSM connection, you must first subscribe to
Circuit Switching Data (CSD), and you must have your phone
number. Make sure you insert your activated SIM card into your
iPAQ Pocket PC before you configure your GSM connection.
After you configure the connection, dial the phone number of the
remote server you are connecting to, and use the GSM connection
to browse the Internet or send or receive e-mail.
Configuring your GSM connection on
your Pocket PC
1. From the Start menu, tap Settings > Connections tab >
Connections icon.
2. In the drop-down list, select Add a new modem connection
from either ISP or My Work Network.
3. Enter a descriptive name for the connection (for example,
iPAQ dialup).
To Next Page
Loading...
Need help?
General
