Managing the Battery
User’s Guide 13–3
NOTE: If the battery is fully discharged, you must connect the
AC Adapter to the Pocket PC to fully charge it before continuing.
It takes up to four hours to fully charge a completely drained
battery.
Removing the Battery
Ä
CAUTION: Before removing the battery, use iPAQ Backup or
ActiveSync to back up data on your Pocket PC. If you need to clear the
memory during the removal process, you will be able to restore the
data. To prevent losing information, you can also copy user-installed
applications to the iPAQ File Store folder.
To remove the battery from the HP iPAQ Pocket PC h6300
Series:
1. Insert the stylus into the battery lock 1 and slide it to the
right or unlocked (red) position.
2. Slide the battery latch down 2 to release the battery.
3. Remove the battery 3.
To Next Page
Loading...
Need help?
General
