13–2 User’s Guide
Managing the Battery
Installing the Battery
To install the removable/rechargeable battery in the HP iPAQ
Pocket PC h6300 Series:
1. Insert the two tabs 1 on the top of the battery into the
latches in the top of the battery compartment on the back
of the Pocket PC.
2. Snap the bottom of the battery into place 2.
3. Insert the stylus into the battery lock 3 and slide it to the left
or locked (green) position.
Ä
CAUTION: The cover must be tightly latched in place and the battery
lock must be locked for the Pocket PC to operate. If the battery lock
is not in the locked position, when you press the Power button, the
Pocket PC will not power on.
To Next Page
Loading...
Need help?
General
