Using Wi-Fi
User’s Guide 7–15
To change server settings:
1. Contact your ISP or network administrator to determine
which name resolution to use, obtain the specific server
address, and determine whether alternate addresses are
available.
NOTE: An alternate address may enable you to connect when the
primary server is unavailable.
2. Be sure Wi-Fi is powered on.
3. From the Start menu, tap Settings > Connections tab >
Connections icon > Advanced tab > Network Card button
> Network Adapters tab.
4. In the My network card connects to... dropdown box, tap
either The Internet or Work.
NOTE: If you are connecting to your ISP at home, tap The
Internet. If you are connecting to a private network such as a
corporate network at work, you should tap Work. If a proxy
server is required, you must select Work. For more information,
refer to the section “Setting Up Proxy Server Settings.”
5. In the Tap an adapter to modify settings box, tap iPAQ
Wi-Fi Wireless Adapter.
6. Tap the Name Servers tab and enter the requested
information.
7. Tap OK to save your settings.
Setting Up VPN Server Connections
A VPN connection enables you to securely connect to a private or
a corporate network, via the Internet. To set up a VPN server
connection:
To Next Page
Loading...
Need help?
General
