9–8 User’s Guide
Using the Camera Features
Using the Self-Timer
The Self-Timer allows you to set a short delay before a picture is
snapped. Use this feature when you want to be in your own
pictures.
To set the timer:
1. From camera mode, tap > Setup tab.
2. Select Self-Timer from the list, then tap Change.
3. Select a delay of either 2 or10 seconds by selecting the
corresponding option on the menu.
4. Tap OK to exit the Settings menu.
To cancel the timer:
1. Tap > Setup tab.
2. Select Self-Timer from the list, then tap Change.
3. Select Off.
4. Tap OK to exit the Settings menu.
Configuring File Settings
The file settings menu allows you to specify how images are
named and stored on your iPAQ Pocket PC. Using the File tab
settings, you can change the filename prefix of images you
capture and adjust the image counter. Additionally, you can
specify the folder on your iPAQ Pocket PC where images are
stored.
To access the file settings menu:
1. From camera mode, tap > File tab.
2. Make the desired changes to the file configuration.
3. Tap OK to exit the Settings menu.
To Next Page
Loading...
Need help?
General
