HP iPAQ h6310 - Charging with the Synchronization Cradle and AC Adapter

Managing the Battery
User’s Guide 13–7
Charging with the Synchronization Cradle
and AC Adapter
Use the Synchronization Cradle to charge the HP iPAQ
Pocket PC.
NOTE: It is not necessary to synchronize your Pocket PC before
charging it.
To charge the Pocket PC using the cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
cradle 2.
2. Slide the bottom of your Pocket PC into the cradle 3 and
push firmly to seat it.
Ä
CAUTION: To avoid damaging your Pocket PC or the cradle, check to
be sure the Pocket PC and cradle connectors are properly aligned
before pushing the Pocket PC into the cradle.
NOTE: The amber charge light on the Power button blinks while
the battery is recharging and turns solid amber (nonblinking)
when the battery is fully charged.