Status-light patterns
Table 7-2 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 7-3 Control-panel status light patterns
Error code Pattern Description Action
10007 Initialization/Startup
While in the Startup state,
the Go, Ready, and Attention
lights cycle (at the rate of
500 ms) one after another.
Reconfiguration
Initialization
During the printer start up,
you can request special
initialization sequences that
reconfigure the printer. When
one of the sequences is
requested, such as cold
reset, the lights cycle as in
the Initialization/Startup state.
Job Cancel
After the cancellation
process has been
completed, the printer
returns to the Ready state.
During the Initialization,
Reconfiguration, and Job
Cancel processes, pressing
buttons has no effect.
140 Chapter 7 Problem solving ENWW
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...