DIMMs (memory or font)
The following sections provide instructions for installing, testing, and removing DIMMs.
Install a DIMM
To install a DIMM, follow the instructions below:
CAUTION Handling a DIMM (memory) without wearing a grounded, antistatic device might
damage the DIMM. Touch any metal part of the printer or other grounded metal before
touching the DIMM.
1. Use the power switch to turn off the printer, and then unplug all of the cables and cords
connected to the printer.
2. Open the DIMM door.
3. Remove the DIMM from the antistatic bag it came in, grasping the DIMM on the top edge.
254 Appendix A Accessory/Consumable addendum ENWW
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...