HP LaserJet P2015 Series

Manual feed
You can use manual feed when printing mixed media. For example, you can use manual feed to print
an envelope, then a letter, then an envelope, and so on. Load envelopes in tray 1 and load
letterhead into tray 2.
To print using manual feed, open the printer Properties or Printer Setup, and then select Manual
Feed (tray 1) from the Source Tray drop-down list. After you have enabled manual feed, press the
Go button to print.
Media type and tray loading
The HP LaserJet P2015 Series has the following tray priority:
1. Tray 1 (if open)
2. Tray 3 (if attached)
3. Tray 2
Minimum media dimensions are 76 x 127 mm (3 x 5 inches).
Maximum media dimensions are 216 x 356 mm (8.5 x 11 inches).
Table 1-2 Tray 1 media information
Media type Media
specifications
Media quantity Driver settings Paper orientation Output
Normal
75 to 104 g/m
2
(20 to 27 lb)
Up to 50 sheets Plain or
unspecified
N/A Output bin
Envelopes
Less than 90 g/m
2
(24 lb)
Up to 10
envelopes
Envelope Short edge
leading, flap on
right side facing up
Straight-through
output door
Labels Standard Up to 10 sheets Labels Side to be printed
facing up
Straight-through
output door
Shipping labels Heavy Up to 10 sheets Cardstock Side to be printed
facing up
Straight-through
output door
Transparencies 4-mil, 0.1
Monochrome
Overhead
Up to 10 sheets Transparencies Side to be printed
facing up
Straight-through
output door
Heavy
90 to 105 g/m
2
(24 to 28 lb)
Up to 10 sheets Light glossy,
glossy, or heavy
glossy
Side to be printed
facing up
Straight-through
output door
Glossy
75 to 105 g/m
2
(20 to 28 lb)
Up to 10 sheets Light glossy,
glossy, or heavy
glossy
Side to be printed
facing up
Straight-through
output door
Letterhead
75 to 104 g/m
2
(20 to 27 lb)
Up to 10 sheets Letterhead Side to be printed
facing up, top of
page in first
Output bin
Cardstock Up to 10 Up to 10 Cardstock Side to be printed
facing up
Straight-through
output door
ENWW Load media 15
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943