Table 1-1 Driver print modes
Mode Media type
PLAIN
75 to 104 g/m
2
(20 to 27 lb)
LIGHT
Less than 75 g/m
2
(20 lb)
HEAVY
90 to 105 g/m
2
(24 to 28 lb)
CARDSTOCK Card stock or thick media
TRANSPARENCY 4-mil, 0.1 Monochrome Overhead Transparencies (OHTs)
ENVELOPE Standard HP LaserJet envelopes
LABEL Standard HP LaserJet labels
BOND Bond paper
ROUGH Rough paper
Guidelines for using media
You can print on a variety of media, such as paper (including up to 100% recycled-fiber-content
paper), envelopes, labels, transparencies, and custom-size media. The following are the supported
media sizes:
●
Minimum: 76 by 127 mm (3 x 5 inches)
●
Maximum: 216 by 356 mm (8.5 x 14 inches)
Properties such as weight, grain, and moisture content are important factors that affect printer
performance and quality. To achieve the best possible print quality, only use high-quality media that
is designed for laser printers.
HP media
HP recommends a variety of media. See the HP LaserJet Printer Family Print Media Guide
(
http://www.hp.com/support/ljpaperguide/) for a full list.
Media to avoid
●
Do not use paper that is too rough.
●
Do not use paper with cutouts or perforations other than standard 3-hole punched paper.
●
Do not use multipart or multipage forms.
●
Do not use paper that contains a watermark if you are printing solid patterns.
Media that can damage the printer
●
Do not use media with staples attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers. Use
only transparencies that are specified for use with HP LaserJet printers.
● Do not use photo paper intended for inkjet printers.
8 Chapter 1 Product information ENWW
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...