2. With a dry, lint-free cloth, wipe any residue from the media-path area and the print-cartridge
cavity.
3. Replace the print cartridge, and close the print-cartridge door.
4. Plug the power cord into the printer.
Clean the printer media path
If you are seeing toner specks or dots on the printouts, clean the printer media path. This process
uses a transparency to remove dust and toner from the media path. Do not use bond or rough paper.
44 Chapter 4 Maintenance ENWW
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...