Error code Pattern Description Action
57 Fan motor error 1. Check the fan cable
connections.
2. If the error persists,
replace the fan.
50XXX Fuser error. The fuser has
a malfunction.
1. Unplug the printer for at
least ten minutes, and
then plug it in again.
2. Verify that the fuser
connector and
thermistor connector
are both firmly seated
in the ECU
3. Perform a heating
element resistance
check.
4. If the resistance
readings are correct,
but the error persists,
replace the fuser.
Table 7-4 Fatal error secondary messages (continued)
ENWW Fatal error secondary messages 149
For more information on the LaserJet P2015 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...