HP ProLiant DL580 Generation 2 - Page 136

Index
M
guide marks, rear access panel 2-12
guidelines
mechanical components, illustrated 1-2
occupational safety and health 2-13
memory
replacing memory 2-15
configuring 2-28
DIMM bank locations 4-5
H
installation requirements 2-22
installing 2-26
hard drive blanks, removing 2-30
insufficient during install 5-9
hazardous conditions, symbols on equipment 2-2
problem diagnosis 5-9
help resources x
removing 2-25
hot-plug hard drive blanks See hard drive blanks
replacement guidelines 2-15
hot-plug mirrored memory LEDs, identified 2-21
memory board
hot-plug SCSI hard drives, removal/replacement
guidelines 2-31
icons 2-21
installing 2-27
hot-plug, removal and replacement procedures,
overview 2-30
LEDs 2-18
parts 2-17
HP authorized reseller x
removing 2-23
slot locations 2-16
I
Mirrored Memory Technology, additional installation
requirements 2-23
icons, memory board 2-21
iLO/spread spectrum switch 4-27
IML (Integrated Management Log) 3-3
N
Insight Manager, described 3-2
non-hot-plug PCI-X expansion board,
removing 2-51
installation problems 5-9
installation requirements, DIMMs 2-22, 2-23
non-hot-plug procedures, overview 2-41
Integrated Lights-Out (iLO), described 3-2
non-maskable interrupt (NMI) switch 4-28
internal diagnostic display 4-22
non-volatile RAM See NVRAM
NVRAM
J
clearing 5-8
jumper, NC770 PCI-X Gigabit Server Adapter 4-30
CMOS problem diagnosis 5-10
problem diagnosis 5-8
L
O
labels, symbols on equipment 2-2
LEDs
online spare memory LEDs, identified 2-19
Battery-Backed Write Cache Enabler 4-17
Online Spare Memory Technology, additional
installation requirements 2-22
front panel 4-7
hot-plug fan 4-12
operating systems, installation problems 5-10
hot-plug mirrored memory 4-21
overheating, caution 2-34
hot-plug power supply 4-13
hot-plug SCSI hard drive 4-10
P
identified 4-6
part numbers
interlock status 4-9
mechanical components 1-3
internal diagnostic display 4-22
system components 1-5
internal PCI Hot Plug 4-16
pass-through board, removing 2-57
memory board 2-18, 4-18
PCI-X board, removing and replacing 2-54
network interface controller 4-15
PCI-X expansion board basket, removing and
replacing 2-53
online spare memory 4-19
PCI-X Hot Plug 4-14
PCI-X Hot Plug 2-35
QuickFind diagnostic display 4-8
PCI-X Hot Plug button
rear unit identification 4-29
illustrated 2-37
single-board mirrored memory 4-20
using 2-35
Index-2 HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide