HP StorageWorks 8/20q Command Line Interface Guide

112 Call Home Configuration
Creating a profile
To create a Call Home profile, enter the profile create command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> profile create profile_1
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
Default Values:
Level Alarm
Format FullText
MaxSize 2000000
EmailSubject <undefined>
RecipientEmail (up to 10 entries allowed)
New Value (press ENTER to accept default value, 'q' to quit):
Level (Alarm,Critical,Warn,None) :
Format (1=FullText, 2=ShortText, 3=Tsc1) :
MaxSize (decimal value, 650-2000000) :
EmailSubject (string, max=64 chars, N=None) : Technical problem
RecipientEmail (ex: admin@company.com, N=None)
1. <undefined> : admin0@company.com
The profile has been created.
This configuration must be saved with the callhome save command
before it can take effect, or to discard this configuration
use the callhome cancel command.
8/20q FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
Deleting a profile
To delete a Call Home profile, enter the profile delete command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> profile delete profile_1
The profile will be deleted. Please confirm (y/n): [n] y
8/20q FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English