HP StorageWorks 8/20q Command Line Interface Guide

268 Command Reference
show setup snmp
Description Displays the current SNMP settings.
Authority None
Syntax
show setup snmp
common
trap [trap_number]
Operands
common
Displays SNMP configuration parameters that are common to all traps. To display common and
trap-specific parameters, omit the operand. See Table 50 for descriptions of the common
configuration parameters.
trap [trap_number]
Displays SNMP configuration parameters for the trap given by [trap_number]. To display
common and trap-specific parameters, omit the operand. See Table 51 for descriptions of the
trap-specific configuration parameters.
Examples The following is an example of the show setup snmp common command:
8/20q FC Switch #> show setup snmp common
SNMP Information
----------------
SNMPEnabled True
Contact <sysContact undefined>
Location <sysLocation undefined>
Description HP StorageWorks 8/20q FC Switch
ObjectID 1.3.6.1.4.1.3873.1.11
AuthFailureTrap True
ProxyEnabled True
SNMPv3Enabled False
The following is an example of the show setup snmp trap command:
8/20q FC Switch #> show setup snmp trap 1
SNMP Information
----------------
Trap1Enabled False
Trap1Address 10.0.0.254
Trap1Port 162
Trap1Severity warning
Trap1Version 2
See also set setup snmp, page 218

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English