HP StorageWorks 8/20q

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 39
Switch configuration parameters
To display the switch configuration parameters, enter the show config switch command. These
parameters determine the operational characteristics of the switch. See Table 36 for descriptions these
parameters.
8/20q FC Switch #> show config switch
Configuration Name: default
-------------------
Switch Configuration Information
--------------------------------
AdminState Online
BroadcastEnabled False
InbandEnabled True
FDMIEnabled False
FDMIEntries 10
DefaultDomainID 19 (0x13)
DomainIDLock True
SymbolicName sw108
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Default Config
ConfigLastSavedBy admin@OB-session5
ConfigLastSavedOn day month date time year
InteropMode Standard
Zoning configuration parameters
To display the zoning configuration parameters, enter the show config zoning command. These
determine how zoning is applied to the switch. See Table 38 for descriptions of these parameters.
8/20q FC Switch #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
MergeAutoSave True
DefaultZone Allow
DiscardInactive False