274 Command Reference
show system
Description Displays the operational status of the Ethernet and DNS host name configuration parameters.
Authority None
Syntax
show system
Examples The following is an example of the show system command:
8/20q FC Switch #> show system
Assigned System Network Information
-----------------------------------
Hostname <undefined>
EthIPv4NetworkAddress 10.20.116.133
EthIPv6NetworkAddress <undefined>
DNSServer1 <undefined>
DNSSearchList1 <undefined>
IPv4GatewayList1 10.20.116.1
IPv6GatewayList1 <undefined>
NTPServer 10.20.10.10
See also set setup system, page 221
show setup system, page 269
To Next Page
Loading...
