HP StorageWorks 8/20q Command Line Interface Guide

90 Device Security Configuration
To display all security sets, groups, and group members in the security database, enter the
security list command, as shown in the following example:
8/20q FC Switch #> security list
Active Security Information
SecuritySet Group GroupMember
----------- ----- -----------
No active securityset defined.
Configured Security Information
SecuritySet Group GroupMember
----------- ----- -----------
alpha
group1 (ISL)
10:00:00:00:00:10:21:16
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0
10:00:00:00:00:10:21:17
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0
Active security set information
The security active and securityset active commands display information about the active
security set.
To display component groups and group members, enter the security active command, as shown in
the following example:
8/20q FC Switch #> security active
Active Security Information
SecuritySet Group GroupMember
----------- ----- -----------
alpha
group1 (ISL)
10:00:00:00:00:10:21:16
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0
10:00:00:00:00:10:21:17
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English