HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 315
zoning save
Description Saves changes made during the current Zoning Edit session. The system informs you that the zoneset
must be activated to implement any changes.
Authority Admin session and a Zoning Edit session.
Syntax
zoning save
Examples The following is an example of the zoning save command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #>
.
.
8/20q FC Switch (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see zoneset activate command.
See also zoning edit, page 308
To Next Page
Loading...
Need help?
General