To Next Page

To Previous Page

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 311

zoning limits

Description Displays the limits and numbers of zonesets, zones, aliases, members per zone, members per alias,

and total members in the zoning database.

Authority None

Syntax

zoning limits

brief

Operands

brief

Displays zoning limits for each category, the current number of objects, and the applicable

zoning database (non-volatile or active). If you omit this operand, the display includes a

membership breakdown for each zone. Table 74 describes the zoning database limits.

Table 74 Zoning database limits

Limit Description

MaxZoneSets Maximum number of zonesets is 256.

MaxZones Maximum number of zones is 2,000.

MaxAliases Maximum number of aliases is 2,500.

MaxTotalMembers Maximum number of zone and alias members that can be stored in the

switch’s zoning database is 10,000. Each instance of a zone member

or alias member counts toward this maximum.

MaxZonesInZoneSets Maximum number of zones that are components of zonesets, excluding

those in the orphan zoneset, that can be stored in the switch’s zoning

database is 2,000. Each instance of a zone in a zoneset counts toward

this maximum.

MaxMembersPerZone Maximum number of members in a zone is 2,000.

MaxMembersPerAlias Maximum number of members in an alias is 2,000.

HP StorageWorks 8/20q Command Line Interface Guide

Other manuals for HP StorageWorks 8/20q