HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 303
zoning active
Description Displays information for the active zoneset or saves the active zoneset to the non-volatile zoning
database.
Authority Admin session for the capture operand.
Syntax
zoning active
capture
Operands
capture
Saves the active zoneset to the non-volatile zoning data base.
Examples The following is an example of the zoning active command:
8/20q FC Switch #> zoning active
Active (enforced) ZoneSet Information
ZoneSet Zone ZoneMember
--------------------------------
wwn
wwn_b0241f
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
The following is an example of the zoning active capture command:
8/20q FC Switch (admin) #> zoning active capture
This command will overwrite the configured zoning database in NVRAM.
Please confirm (y/n): [n] y
The active zoning database has been saved.
See also zone, page 298
zoneset, page 301
To Next Page
Loading...
Need help?
General