308 Command Reference
zoning edit
Description Opens a Zoning Edit session for the non-volatile zoning database or merged zoneset in which to
create and manage zonesets and zones.
Authority Admin session
Syntax
zoning edit [database]
Operands
[database]
Opens an edit session for the zoning database given by [database]. If you omit [database], an
edit session for the non-volatile zoning database is opened. Table 73 describes the zoning
database parameters
Table 73 Zoning database parameters
Parameter Description
configured Opens a zoning edit session for the non-volatile zoning database.
merged Opens a zoning edit session for the temporary, merged zoneset received
from another switch.
Examples The following is an example of the zoning edit command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #>
.
.
8/20q FC Switch (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see Zoneset Activate command.
See also zone, page 298
zoneset, page 301
zoning cancel, page 304
To Next Page
Loading...
Need help?
General