HP StorageWorks 8/20q

266 Command Reference
show setup radius
Description Displays RADIUS server information.
Authority None
Syntax
show setup radius
common
server [server_number]
Operands
common
Displays the configuration parameters that are common for all RADIUS servers. To display
common and server-specific information, omit the operand. See Table 47 for a description of the
common configuration parameters.
server [server_number]
Displays the configuration parameters for the RADIUS server given by [server_number].
[server_number] is an integer corresponding to a configured server. To display common and
server-specific information, omit the operand. Refer to Table 48 for a description of the
server-specific configuration parameters.
Examples The following is an example of the show setup radius common command:
8/20q FC Switch #> show setup radius common
Radius Information
------------------
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 2
The following is an example of the show setup radius server command:
8/20q FC Switch #> show setup radius server 2
Radius Information
------------------
Server: 2
ServerIPAddress bacd:1234:bacd:1234:bacd:1234:bacd:1234
ServerUDPPort 1812
DeviceAuthServer True
UserAuthServer True
AccountingServer True
Timeout 2
Retries 0
SignPackets False
Secret ********
See also set setup radius, page 212