HP StorageWorks 8/20q Command Line Interface Guide

182 Command Reference
Notes The following tables specify the various factory default settings:
• Enter the show setup callhome command to display the Call Home database configuration.
The default values are shown in Table 16.
• Enter the show config switch command to display the switch configuration. The default
values are shown in Table 17.
• Enter the show config port command to display the port configuration. The default values
are shown in Table 18.
• Enter show config threshold command to display the port threshold alarm configuration.
The default values are shown in Table 19.
• Enter the show config zoning command to display the zoning configuration. The default
values are shown in Table 20.
• Enter the show setup snmp command to display the SNMP configuration. The default values
are shown in Table 21.
• Enter the show setup radius command to display the RADIUS configuration. The default
values are shown in Table 22.
• Enter the show setup services command to display the switch service configuration. The
default values are shown in Table 23.
• Enter the show setup system dns command to display the DNS host configuration. The
default values are shown in Table 24.
• Enter the show setup system ipv4 command to display the IPv4 Ethernet configuration. The
default values are shown in Table 25.
• Enter the show setup system ipv6 command to display the IPv6 Ethernet configuration. The
default values are shown in Table 26.
• Enter the show setup system logging command to display the event logging
configuration. The default values are shown in Table 27.
• Enter the show setup system ntp command to display the NTP configuration. The default
values are shown in Table 28.
• Enter the show setup system timers command to display the timer configuration. The
default values are shown in Table 29
.
• Enter the show config security command to display security configuration. The default
values are shown in Table 30.
Table 16 Call Home service configuration defaults
Parameter Default
PrimarySMTPServerAddr 0.0.0.0
PrimarySMTPServerPort 25
PrimarySMTPServerEnabled False
SecondarySMTPServerAddr 0.0.0.0
SecondarySMTPServerPort 25
SecondarySMTPServerEnabled False
ContactEmailAddress nobody@localhost.localdomain
PhoneNumber <undefined>
StreetAddress <undefined>
FromEmailAddress nobody@localhost.localdomain
ReplyToEmailAddress nobody@localhost.localdomain
ThrottleDupsEnabled True

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English