HP StorageWorks 8/20q

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 243
show env
Description Displays temperature and voltage information.
Authority None
Syntax
show env
Examples The following is an example of the show env command:
8/20q FC Switch #? show env
Temperature(C) Sensors:
Sensor Description Status Current High Warn High Alarm
------ ----------- ------ ------- --------- ----------
0 BOARD Normal 24 65 70
1 DS1780 Normal 28 n/a n/a
2 MAX1617 Normal 31 65 70
3 ASIC Normal 49 95 100
Voltage Sensors:
Sensor Description Status Current Low Alarm High Alarm
------ ----------- ------ ------- --------- ----------
0 2.5V Good 2.50 2.20 2.80
1 1.25V Good 1.24 1.00 1.50
2 3.3V Good 3.32 3.02 3.58
3 12V Good 12.00 10.00 13.31
4 1.2V Good 1.26 1.04 1.38
5 1.5V Good 1.50 1.31 1.68
6 1.8V_ANALOG Good 1.78 1.58 2.02
7 1.8V Good 1.79 1.60 1.99
8 2.5V_ANALOG Good 2.40 2.08 2.84
See also show temp, page 275
show voltage, page 282