HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 245
show fdmi
Description Displays detailed information about the device host bus adapter.
Authority None
Syntax
show fdmi [port_wwn]
Operands
[port_wwn]
The device WWPN for which to display information. If you omit [port_wwn], the command
displays a summary of host bus adapter information for all attached devices in the fabric. Illegal
characters in the display appear as question marks (?).
Examples The following is an example of the show fdmi command:
8/20q FC Switch #> show fdmi
HBA ID PortID Manufacturer Model Ports
-------- ------ --------------- ------- -----
21:01:00:e0:8b:27:aa:bc 610000 QLogic Corporation QLA2342 2
21:00:00:00:ca:25:9b:96 180100 QLogic Corporation QL2330 2
The following is an example of the show fdmi wwn command:
8/20q FC Switch #> show fdmi 21:00:00:e0:8b:09:3b:17
FDMI Information
----------------
Manufacturer QLogic Corporation
SerialNumber [04202
Model QLA2342
ModelDescription QLogic QLA2342 PCI Fibre Channel Adapter
PortID 610000
NodeWWN 20:00:00:e0:8b:07:aa:bc
HardwareVersion FC5010409-10
DriverVersion 8.2.3.10 Beta 2 (W2K VI)
OptionRomVersion 1.21
FirmwareVersion 03.02.13.
OperatingSystem SunOS 5.8
MaximumCTPayload 2040
NumberOfPorts 1
Port 21:01:00:e0:8b:27:aa:bc
SupportedFC4Types FCP
SupportedSpeed 2Gb/s
CurrentSpeed 2Gb/s
MaximumFrameSize 2048
OSDeviceName
HostName