HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 145
feature
Description Adds license key features to the switch and displays the license key feature log. To order a license
key, contact your switch distributor or your authorized reseller. Upgrading a switch is not disruptive,
nor does it require a switch reset.
Authority Admin session for add operand only
Syntax
feature
add [license_key]
log
Operands
add [license_key]
Adds the feature that corresponds to the value given by [license_key]. [license_key] is case
insensitive.
log
Displays a list of installed license key features.
Notes • The HP StorageWorks 8/20q Port Activation Upgrade LTU enables additional SFP ports in
increments of four on the standard 12-port, single power supply 8/20q Fibre Channel Switch for
totals of 16 or 20 ports.
Examples The following is an example of the feature add command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> feature add 1-LCVXOWUNOJBE6
License upgrade to 20 ports
Do you want to continue with license upgrade procedure? (y/n): [n] y
Alarm Msg:[day mon date time year][A1005.0030][SM][Upgrading Licensed Ports
to 20]
The following is an example of the feature log command:
8/20q FC Switch #> feature log
Mfg Feature Log:
----------------
Switch Licensed for 8 ports
Customer Feature Log:
---------------------
1) day month date 19:39:24 year - Switch Licensed for 20 ports
1-LCVXOWUNOJBE6
To Next Page
Loading...
Need help?
General