HP StorageWorks 8/20q - Switch Configuration Defaults; Port Configuration Defaults

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 183
Table 17 Switch configuration defaults
Parameter Default
AdminState Online
Broadcast Enabled True
InbandEnabled True
FDMIEnabled True
FDMIEntries 1,000
DefaultDomainID 1 (0x Hex)
DomainIDLock False
SymbolicName 8/20q FC Switch
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Config Default
Table 18 Port configuration defaults
Parameter Port Defaults
AdminState Online
LinkSpeed Auto
PortType GL
SymbolicName Port n, where n is the port number
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnable True
AutoPerfTuning True
LCFEnable False
MFSEnable False
MSEnable True
NoClose False
IOStreamGuard Auto
VIEnable False
PDISCPingEnable True