134 Command Reference
The following is an example of the capture remove command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> capture remove
Capture Entries for Profile: Tech_Support_Center
Index TimeOfDay DayOfWeek Interval
----- --------- --------- --------
1 02:00 Sat 1 (weeks)
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile
Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
See also profile, page 175
To Next Page
Loading...
Need help?
General