HP StorageWorks 8/20q Command Line Interface Guide

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 169
Direction
Direction of the data traffic to which the policy is to be applied:
• In—Data entering the source
• Out—Data leaving the source
Priority
A number from –2147483647 to +214783647 that determines
priority for this policy in the security policy database. The higher the
number, the higher the priority.
Action
Processing to apply to data traffic:
• Discard—Unconditionally disallow all inbound or outbound
data traffic.
• None—Allow all inbound or outbound data traffic without
encryption or decryption.
• Ipsec—Apply IP security to inbound and outbound data traffic.
ProtectionDesired
Type of IP security protection to apply:
• AH—Authentication Header
• ESP—Encapsulating Security Payload
• Both—Apply both AH and ESP protection
ahRuleLevel
Rule level to apply for AH protection:
• Default—Use the system wide default for the protocol
• Use—Use a security association if one is available
• Require—A security association is required whenever a packet is
sent that is matched with the policy
espRuleLevel
Rule level to apply for ESP protection:
• Default—Use the system wide default for the protocol
• Use—Use a security association if one is available
• Require—A security association is required whenever a packet is
sent that is matched with the policy
Table 14 Policy configuration parameters (continued)
Parameter Description
Operands
delete [policy]
Deletes the policy given by [policy] from the Security Policy database. You must enter the
ipsec save command afterwards to save your changes.
edit [policy]
Opens an edit session in which to change the configuration of an existing policy given by
[policy].
list [option]
Displays the configuration for the policies given by [option]. If you omit [option], the command
displays the configuration of all active policies. [option] can be one of the following:
[policy]
Displays the configuration for the policy given by [policy].
active
Displays the configuration for all active policies.
configured
Displays the configuration for all user-defined policies.
edited
Displays the configuration for all policies that have been modified, but not saved.

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English