HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 289
Examples The following example performs an online test on port 1:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> test port 1 online
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the default value. If you
wish to terminate this process before reaching the end of the list press 'q'
or 'Q' and the ENTER key to do so.
LoopCount (decimal value, 1-4294967295) [429496729]
FrameSize (decimal value, 40-2148) [256 ]
DataPattern (32-bit hex value or 'Default') [Default ]
StopOnError (True / False) [True ]
LoopForever (True / False) [False ]
Do you want to start the test? (y/n) [n] y
The test has been started.
A notification with the test result(s) will appear
on the screen when the test has completed.
8/20q FC Switch (admin) #>
Test for port 1 Passed.
See also test cancel, page 287
test status, page 290
test switch, page 292
To Next Page
Loading...
Need help?
General