HP StorageWorks 8/20q - Page 299

HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 299
remove [zone] [member_list]
Removes the ports/devices given by [member_list] from the zone given by [zone]. Use a
<space> to delimit aliases and ports/devices in [member_list]. [member_list] can have
any of the following formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–239; port
numbers can be 0–255.
• 6-character hexadecimal device Fibre Channel address (hex)
• 16-character hexadecimal WWPN with the format xx:xx:xx:xx:xx:xx:xx:xx.
•Alias name
You must enter the zoning save command to save your changes.
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new]. You must enter the
zoning save command to save your changes.
zonesets [zone]
Displays all zonesets of which the zone given by [zone] is a component. This operand does not
require an Admin session.
Examples The following is an example of the zone list command:
8/20q FC Switch #> zone list
Zone ZoneSet
---- -------
wwn_b0241f
zone_set_1
wwn_23bd31
zone_set_1
wwn_221416
zone_set_2
wwn_2215c3
zone_set_2
wwn_0160ed
zone_set_3
The following is an example of the zone members command:
8/20q FC Switch #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
---------------------------------
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
The following is an example of the zone orphans command:
8/20q FC Switch #> zone orphans
Current list of orphan zones
----------------------------
zone3
zone4