HP StorageWorks P9000 - Disk Arrays User Guide

Table 19 RAID Manager error codes for Continuous Access Journal (continued)
Error contentError code (SSB2)Error code (SSB1)
A request of Cnt Ac-J Pairresync (suspend transition mode) was rejected
because the journal could not execute the suspend transition, that is, the
journal was in HLDE or PSUE status.
EA1B
A request of Cnt Ac-J Pairresync (Reverse mode) was rejected because the
specified secondary journal was not in the Stopped status.
EA1C
A request of Cnt Ac-J Pairresync (Reverse mode) was rejected because the
request was received for the S-VOL as the P-VOL.
EA1E
A request of Cnt Ac-J Pairresync (Reverse mode) was rejected because the
request was received for the P-VOL as the S-VOL.
EA20
A request of Cnt Ac-J Pairresync (Reverse mode) was rejected because the
state of journal was not Stopped.
EA22
A request of Cnt Ac-J Pairresync (Reverse mode) was rejected because the
state of S-VOL was not SSWS.
EA25
A request of Cnt Ac-J Delete pair was rejected because the state of master
journal was other than Active or Stopped.
EA29
A request of Cnt Ac-J Pairsplit-S was rejected because the state of restore
journal was other than Active or Stopped.
EA2C
A request of Cnt Ac-J suspend pair was rejected because the state of master
journal was other than Active.
EA33
A request of Cnt Ac-J suspend pair was rejected because the state of restore
journal was other than Active.
EA36
A request of Cnt Ac-J delete pair was rejected because the specified S-VOL
was in the state of status transition.
EA3A
A request of Cnt Ac-J suspend pair (Reverse mode) was rejected because
the specified S-VOL was in the state of Suspending.
EA3B
A request of Cnt Ac-J Paircreate was rejected because the desired capacity
exceeded the charging capacity of the primary system’s program product.
EA40
A request of Cnt Ac-J Paircreate was rejected because the desired capacity
exceeded the charging capacity of the secondary system’s program product.
EA41
A request to delete or suspend a Cnt Ac-J pair was rejected because the
specified volume is used in the system that consists of multiple primary and
secondary systems.
EA8B
A request to create a Cnt Ac-J pair for the system that consists of multiple
primary and secondary systems was rejected because the microcode was
being replaced.
EA92
118 Troubleshooting

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English