HP StorageWorks P9000 - Disk Arrays User Guide

2. In the Pair Operation window, click Export. A message appears and asks whether to save
volume pair information in a file.
3. Click OK to close the message.
A dialog box appears and prompts you to save a file.
4. Enter the name of the file and then click Save.
A message appears.
5. Click OK to close the message.
If Subsystem or an LDKC is selected in the tree, you can abort the exporting by clicking Cancel
in the dialog box that is open during the export processing.
Monitor copy operations data, I/O
You can monitor and use data for remote copy operations data and I/O statistics for monitored
volumes on the storage system in the Usage Monitor window.
This chapter shows you how to do the following:
• “Select data to be graphed” (page 76)
• “Manipulate graph, save data” (page 78)
In Remote Web Console, click Actions > Remote Copy > Continuous Access Journal > Usage Monitor.
The Usage Monitor window displays as shown in Figure 16 (page 75). The fields on the Usage
Monitoring window are described in Table 9 (page 75).
You start and stop monitoring in Performance Monitor. See HP StorageWorks P9000 Performance
for Open and Mainframe Systems User Guide for instructions.
Figure 16 Usage Monitor Window
Table 9 Fields on the Usage Monitor window
DescriptionField
• Enable: Monitoring is on. Graph displays.
• Disable: Monitoring is off. Graph is disabled.
Monitoring Switch
The data collection interval.Gathering Interval
Monitor pair activity and status 75

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English