DescriptionItem
The Preview list shows changes that have been made in the window. When you change settings
in the window, the changes appear in the Preview list before the changes are applied to storage
systems. If you are sure that information in the Preview list is correct, click Apply to apply the
settings that you have made.
When the Preview list shows changes that have been made, you can perform only the same
type of operation that you have been doing and cannot perform most of other operations (you
can only view detailed information about journals even when the Preview list shows changes).
For example, if you are trying to delete journals and the Preview list shows the journals that you
want to delete, you are unable to perform any other operations; for example, you are unable
to split mirrors and restore mirrors.
Preview
Indicates the operation that will occur when you click Apply.
• Edit Journal Volumes: Register or delete journal volumes.
• Change Journal Option: Change journal options
• Delete Journals: Delete journal
• Change Mirror Option: Change mirror options
• Pairsplit –r: Split a mirror
• Pairresync: Restore a mirror
• Pairsplit –S: Delete a mirror
• Assign R-Cmd.Dev: Assign a remote command device to a mirror
• Release R-Cmd.Dev: Release an assigned remote command device
• Blank: Nothing will occur when you click Apply
Operation
The number to the left of the slash (/) indicates the number of items appearing in the Preview
list. The number to the right of the slash indicates the maximum number of items that can appear
in the Preview list. For example, if Preview 010/256 appears, you can add another 246 items
to the Preview list.
Preview
Applies settings in the Preview list to the storage systems.Apply
Cancels settings in the Preview list.Cancel
Journal Detail window
This window lets you view detailed information about the individual journals.
154 Continuous Access Journal GUI reference
To Next Page
Loading...
Need help?
General