HP StorageWorks P9000 - Disk Arrays User Guide

DescriptionOperation Displayed
The status of the pair was changed from COPY to PAIR
because of an operation from the primary storage system.
Status Change by MCU(COPY to PAIR)
The status of the pair was changed from COPY to PSUS
or PSUE because of an operation from the primary storage
system.
Status Change by MCU(COPY to PSUS/PSUE)
The status of the pair was changed from PAIR to PSUS or
PSUE because of an operation from the primary storage
system.
Status Change by MCU(PAIR to PSUS/PSUE)
The status of the pair was changed from PAIR to SMPL
because of an operation from the primary storage system.
Status Change by MCU(PAIR to SMPL)
The status of the pair was changed from COPY to SMPL
because of an operation from the primary storage system.
Status Change by MCU(COPY to SMPL)
The status of the pair was changed from PSUS or PSUE to
SMPL because of an operation from the primary storage
system.
Status Change by MCU(PSUS/PSUE to SMPL)
The status of the pair was changed from PSUS or PSUE to
COPY because of an operation from the primary storage
system.
Status Change by MCU(PSUS/PSUE to COPY)
The status of the pair was changed because an operation
for splitting a pair started at the secondary storage system.
Status Change by RCU(Pairsplit-r Start)
The status of the pair was changed because an operation
for splitting a pair finished at the secondary storage system.
Status Change by RCU(Pairsplit-r Complete)
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PSUS or PSUE to SMPL.
Status Change by RCU(PSUS/PSUE to SMPL; Pairsplit-S
Start)
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from COPY to SMPL.
Status Change by RCU(COPY to SMPL; Pairsplit-S Start)
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PAIR to SMPL.
Status Change by RCU(PAIR to SMPL; Pairsplit-S Start)
The status of the pair was changed because an operation
for releasing a pair finished at the secondary storage
system.
Status Change by RCU(Pairsplit-S Complete)
A pair became ready for delta resync.Ready for Delta resync
The failure occurred with the pair which was ready for
delta resync.
Ready for Delta resync(Failure)
The status of the P-VOL was changed to HOLD because of
a delta resync operation.
Status Change for Delta resync
The status of the pair was changed from SMPL to HOLD
because of an operation from the primary storage system.
Status Change by MCU(SMPL to HOLD)
The status of the pair was changed from HOLD to PAIR
because of an operation from the primary storage system.
Status Change by MCU(HOLD to PAIR)
The status of the pair was changed from HOLD to COPY
because of an operation from the primary storage system.
Status Change by MCU(HOLD to COPY)
The status of the pair was changed from HOLD to SMPL
because of an operation from the primary storage system.
Status Change by MCU(HOLD to SMPL)
186 Continuous Access Journal GUI reference

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English