240 Fabric OS Administrator’s Guide
53-1002745-02
Management interface security
7
• Use the IP secConfig –-show policy ike –a command with the specified operands to
display IKE policies.
• Use the IP secConfig –-flush manual-sa command with the specified operands to flush
the created SAs in the kernel SADB.
Flushing SAs requires IP sec to be disabled and re-enabled. This operation is disruptive to traffic
using the tunnel.
Notes
• As of Fabric OS 7.0.0, IP sec no longer supports null encryption (null_enc) for IKE policies.
• IPv6 policies cannot tunnel IMCP traffic.
To Next Page
Loading...
