Fabric OS Administrator’s Guide 405
53-1002745-02
Configuring encryption and compression
14
4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.
Disabling encryption
To disable encryption on a port, follow these steps:
1. Connect to the switch and log in using an account with secure admin permissions, or an
account with OM permissions for the EncryptionConfiguration RBAC class of commands.
2. Use the portDisable command to disable the port on which you want to disable encryption
3. Enter the portCfgEncrypt
--disable command.
The following example disables encryption on port 21 on a Brocade 6510 switch:
switch:admin> portcfgencrypt --disable 21
The following example disables encryption on port 15 of an FC16-32 blade in slot 9 of an
enterprise class platform:
switch:admin> portcfgencrypt --disable 9/15
4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.
Disabling compression
To disable compression on a port, follow these steps:
1. Connect to the switch and log in using an account with admin permissions, or an account with
OM permissions for the SwitchPortConfiguration RBAC class of commands.
2. Use the portDisable command to disable the port on which you want to disable compression.
3. Enter the portCfgCompress
--disable command.
The following example disables compression on port 21 on a Brocade 6510 switch:
switch:admin> portcfgcompress --disable 21
The following example disables compression on port 15 of an FC16-32 blade in slot 9 of an
enterprise class platform:
switch:admin> portcfgcompress --disable 9/15
4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.
To Next Page
Loading...
Need help?
General