EasyManuals Logo

HP StoreFabric SN6500B User Manual

HP StoreFabric SN6500B
666 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
Fabric OS Administrator’s Guide 265
53-1002745-02
Firmware download from a USB device
9
Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition
of the switch.
[5]: Mon Mar 22 04:37:24 2010
Slot 7 (CP1, standby): The firmware commit operation has started. This may
take up to 10 minutes.
[6]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): The commit operation has completed successfully.
[7]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): Firmwaredownload command has completed successfully.
Use firmwareshow to verify the firmware versions.
11. Enter the firmwareShow command to display the new firmware versions.
Firmware download from a USB device
The Brocade 300, 5100, 5300, 6505, 6510, 6520, 7800, 8000, and VA-40FC switches and the
Brocade DCX, DCX-4S, or DCX 8510 Backbones support a firmware download from a Brocade
branded USB device attached to the switch or active CP. Before the USB device can be accessed by
the firmwareDownload command, it must be enabled and mounted as a file system. The firmware
images to be downloaded must be stored under the relative path from
/usb/usbstorage/brocade/firmware or use the absolute path in the USB file system. Multiple
images can be stored under this directory. There is a firmwarekey directory where the public key
signed firmware is stored.
When the firmwareDownload command line option,
-U (upper case), is specified, the
firmwareDownload command downloads the specified firmware image from the USB device. When
specifying a path to a firmware image in the USB device, you can only specify the relative path to
/firmware or the absolute path.
Enabling the USB device
1. Log in to the switch using an account assigned to the admin role.
2. Enter the usbStorage -e command.
Viewing the USB file system
1. Log in to the switch using an account assigned to the admin role.
2. Enter the usbStorage -l command.
BrcdDCXBB:admin> usbstorage –l
firmware\ 381MB 2010 Mar 28 15:33
v7.1.0\ 381MB 2010 Mar 28 10:39
config\ 0B 2010 Mar 28 15:33
support\ 0B 2010 Mar 28 15:33
firmwarekey\ 0B 2010 Mar 28 15:33
Available space on usbstorage 79%

Table of Contents

Other manuals for HP StoreFabric SN6500B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StoreFabric SN6500B and is the answer not in the manual?

HP StoreFabric SN6500B Specifications

General IconGeneral
BrandHP
ModelStoreFabric SN6500B
CategorySoftware
LanguageEnglish

Related product manuals