EasyManuals Logo

HP StoreFabric SN6500B User Manual

HP StoreFabric SN6500B
666 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #286 background imageLoading...
Page #286 background image
286 Fabric OS Administrator’s Guide
53-1002745-02
Account management and Virtual Fabrics
10
Account management and Virtual Fabrics
When user accounts are created, they are assigned a list of logical fabrics to which they can log in and
a home logical fabric (home FID). When you connect to a physical chassis, the home FID defines the
logical switch to which you are logged in by default. You can change to a different logical switch
context, as described in “Changing the context to a different logical fabric” on page 299.
When you are logged in to a logical switch, the system prompt changes to display the FID of that
switch. The following are example prompts for when you are logged in to the default logical switch
(FID = 128) and a user-defined logical switch (FID = 15):
switch:FID128:admin>
switch:FID15:admin>
Refer to Chapter 5, “Managing User Accounts,” for information about creating user accounts and
assigning FIDs to user accounts.
Supported platforms for Virtual Fabrics
The following platforms are Virtual Fabrics-capable:
Brocade 5100
Brocade 5300
Brocade 6510
Brocade 6520
Brocade 7800
Brocade VA-40FC, in Native mode only
Brocade DCX
Brocade DCX-4S
Brocade DCX 8510 family
Some restrictions apply to the ports, depending on the port type and blade type. The following
sections explain these restrictions.
Supported port configurations in the fixed-port switches
There are no restrictions on the ports in the Brocade 5100, 5300, 6510, 6520, and VA-40FC;
however, the following rules apply:
Any port can belong to any logical switch (including the base switch and default logical switch),
with the exception that F_Ports cannot belong to the base switch.
The default logical switch can use XISLs, except on Brocade DCX or DCX-4S devices.
The default logical switch can also be a base switch.
Restrictions on fixed-port switches
Brocade 7800— Although it can be divided into four logical switches, you cannot use an XISL on
this switch because a base switch is not supported on this device.

Table of Contents

Other manuals for HP StoreFabric SN6500B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StoreFabric SN6500B and is the answer not in the manual?

HP StoreFabric SN6500B Specifications

General IconGeneral
BrandHP
ModelStoreFabric SN6500B
CategorySoftware
LanguageEnglish

Related product manuals