Fabric OS Administrator’s Guide 35
53-1002745-02
The following hardware platforms are supported by this release of Fabric OS:
• Fixed-port switches:
- Brocade 300 switch
- Brocade 5100 switch
- Brocade 5300 switch
- Brocade 5410 embedded switch
- Brocade 5424 embedded switch
- Brocade 5430 embedded switch
- Brocade 5450 embedded switch
- Brocade 5460 embedded switch
- Brocade 5470 embedded switch
- Brocade 5480 embedded switch
- Brocade 6505 switch
- Brocade 6510 switch
- Brocade 6520 switch
- Brocade 7800 extension switch
- Brocade 8000 FCoE switch
- Brocade VA-40FC
- Brocade Encryption Switch
• Brocade DCX Backbone family:
- Brocade DCX
- Brocade DCX-4S
• Brocade DCX 8510 Backbone family:
- Brocade DCX 8510-4
- Brocade DCX 8510-8
What’s new in this document
Information that was modified:
• Added a high-level Table of Contents.
• In “Switch and Backbone shutdown” on page 76, changed the advice about performing
graceful shutdowns from a recommendation to a “must”.
• In “Duplicate PWWN handling during device login” on page 109, added a third option for
configuring the behavior. The third option takes the port type into account when determining
which login to use.
• Added section “Supported LDAP options” on page 151.
• In “RADIUS configuration with Admin Domains or Virtual Fabrics” on page 155, added
ChassisRole to the list of accepted keys.
• In “Installing a switch certificate” on page 185, added an example of installing a certificate in
noninteractive mode.
To Next Page
Loading...
Need help?
General