242 Fabric OS Administrator’s Guide
53-1002745-02
Configuration settings
8
If your user account has chassis account permissions, you can use any of the following options
when uploading or downloading a configuration file:
Configuration file format
The configuration file is divided into three areas: the header, the chassis section, and one or more
logical-switch sections.
The following is an example of a configuration file with two logical-switch sections.
[Configuration upload Information]
Configuration Format = 3.0
Minimum Compatible Format = 3.0
Excluding Format = 0.0
date = Tue Mar 1 15:53:18 2011
FOS version = v7.0.0.0
Number of LS = 2
[Chassis Configuration Begin]
[fcRouting]
[Chassis Configuration]
[LicensesDB]
[Bottleneck Configuration]
[DMM_WWN]
[Licenses]
[Chassis Configuration End]
date = Tue Mar 1 21:28:52 2011
[Switch Configuration Begin : 0]
SwitchName = Sprint5100
Fabric ID = 128
[Boot Parameters]
[Configuration]
[Bottleneck Configuration]
[Zoning]
[Defined Security policies]
-fid To upload the specified FID configuration.
-all To upload all of the system configuration, including the chassis section
and all switch sections for all logical switches.
NOTE: Use this parameter when obtaining a complete capture of the switch
configuration in a switch that has Virtual Fabrics mode disabled.
-chassis To upload only the chassis section of the system configuration file.
To Next Page
Loading...
Need help?
General