Fabric OS Administrator’s Guide 433
53-1002745-02
Chapter
17
Managing Administrative Domains
In this chapter
•Administrative Domains overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
•Admin Domain management for physical fabric administrators . . . . . . . . 442
•SAN management with Admin Domains . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
Administrative Domains overview
An Administrative Domain (Admin Domain or AD) is a logical grouping of fabric elements that
defines which switches, ports, and devices you can view and modify. An Admin Domain is a filtered
administrative view of the fabric.
If you do not implement Admin Domains, the feature has no impact on users and you can ignore this
chapter.
Admin Domains permit access to a configured set of users. Using Admin Domains, you can
partition the fabric into logical groups and allocate administration of these groups to different user
accounts. These accounts can manage only the Admin Domains assigned to them and cannot
make changes to the rest of the fabric.
For example, you can put all the devices in a particular department in the same Admin Domain for
ease of managing those devices. If you have remote sites, you could put the resources in the
remote site in an Admin Domain and assign the remote site administrator to manage those
resources.
Admin Domains and Virtual Fabrics are mutually exclusive and are not supported at the same time
on a switch.
Do not confuse Admin Domains with zones:
• Zones define which devices and hosts can communicate with each other.
• Admin Domains define which users can manage which devices, hosts, and switches.
You can have up to 256 Admin Domains in a fabric (254 user-defined and 2 system-defined),
numbered from 0 through 255.
Admin Domains are designated by a name and a number. This document refers to specific Admin
Domains using the format “ADn” where n is a number between 0 and 255.
The Admin Domain administrator can define up to 254 ADs (AD1 through AD254) in the AD
database; however, it is recommended that no more than 16 active Admin Domains run
concurrently. More than 16 active Admin Domains might cause performance degradation and
unpredictable system behavior.
To Next Page
Loading...
Need help?
General