Fabric OS Administrator’s Guide 243
53-1002745-02
Configuration settings
8
[Active Security policies]
[cryptoDev]
[FICU SAVED FILES]
[Banner]
[End]
[Switch Configuration End : 0]
date = Tue Mar 1 21:28:52 2011
[Switch Configuration Begin : 1]
SwitchName = switch_2
Fabric ID = 1
[Boot Parameters]
[Configuration]
[Bottleneck Configuration]
[Zoning]
[Defined Security policies]
[Active Security policies]
[cryptoDev]
[FICU SAVED FILES]
[Banner]
[End]
[Switch Configuration End : 1]
Chassis section
There is only one chassis section within a configuration. It defines configuration data for chassis
components that affect the entire system, not just one individual logical switch. The chassis
section is included in non-Virtual Fabric modes only if you use the configUpload
-all command.
The chassis section specifies characteristics for the following software components:
• FC Routing – Fibre Channel Routing
• Chassis configuration – Chassis configuration
• FCOE_CH_CONF – FCoE chassis configuration
• UDROLE_CONF – User-defined role configuration
• LicensesDB – License Database (slot-based)
• DMM_WWN – Data migration manager World Wide Name configuration
• Licenses – (Feature-based) Licenses configuration
• AGWWN_MAPPING_CONF – Access Gateway WWN mapping configuration
To Next Page
Loading...
Need help?
General