Fabric OS Administrator’s Guide 325
53-1002745-02
Zone creation and maintenance
11
If you enter yes, and the cfgSave operation completes successfully then the following RASlog
message [ZONE-1062] will be posted.
[ZONE-1062], 620/181, FID 128, WARNING, sw0, Defined and Effective zone
configurations are inconsistent, ltime:2012/09/03-23:18:30:983609
You can then either re-enable the updated configuration or revert to the older configuration. If there
is no impact to the effective configuration with the latest update to the zoning configuration, then
the following message will be displayed.
“You are about to save the Defined zoning configuration. This action will only
save the changes on Defined configuration.
Do you want to proceed?” (yes, y, no, n): [no] y
Example ‘Inconsistent Defined and Effective Zone Database’ warning to user
switch: admin> zoneShow
Defined configuration:
cfg: cfg1 zone1; zone2
zone: zone1 10:00:00:00:00:00:00:01; 10:00:00:00:00:00:00:02
zone: zone2 1,1; 1,2
Effective configuration:
cfg: cfg1
zone: zone1 10:00:00:00:00:00:00:01
10:00:00:00:00:00:00:02
zone: zone2 1,1; 1,2
switch: admin> zoneadd zone1, 10:00:00:00:00:00:00:03
switch: admin> cfgsave
WARNING!!!
The changes you are attempting to save will render the
Effective configuration and the Defined configuration inconsistent.
The inconsistency will result in different Effective Zoning
configurations for switches in the fabric if a zone merge or
HA failover happens. To avoid inconsistency it is recommended to
commit the configurations using the 'cfgenable' command.
Do you want to proceed with saving the Defined zoning
configuration only? (yes, y, no, n): [no] y
Updating flash ...
switch:admin> zoneShow
Defined configuration:
cfg: cfg1 zone1; zone2
zone: zone1 10:00:00:00:00:00:00:01; 10:00:00:00:00:00:00:02;
10:00:00:00:00:00:00:03
zone: zone2 1,1; 1,2
Effective configuration:
cfg: cfg1
zone: zone1 10:00:00:00:00:00:00:01; 10:00:00:00:00:00:00:02
zone: zone2 1,1; 1,2
To Next Page
Loading...
Need help?
General