HPE StoreOnce 5100 System Capacity Upgrade System components
1 Drive cage 2 Backplane
3 Interface between fan and backplane 4 Airguard
5 Voltage Regulator (VRM) or power module 6 Power supply
7 Enclosure 8 I/O module
9 Fan module 10 Rear unit ID
11 Disk drive
Figure 6: HPE StoreOnce 5100 System Capacity Upgrade System components
Optional Hardware Components
All Optional Hardware PCIe cards and SFP transceivers that support connection to a 10GbE network and/or a
Fibre Channel SAN can be swapped like for like. The following table lists the part numbers for HPE
StoreOnce Optional Hardware. Optional Hardware is supported with the HPE StoreOnce 5100 System and
HPE StoreOnce 3500 Series. It is not supported with the HPE StoreOnce 3100 System.
Table 6: Optional Hardware Part Numbers
Description Part Part number Hot plug?
10GbE-T network card SPS-BD ETHERNET
10GB 2P 530T ADPTR
657128-001 No
10GbE SFP network card SPS-PCA Ethernet 10Gb
2P 557 SFP-ADPTR
792834-001 No
Table Continued
HPE StoreOnce 5100 System Capacity Upgrade System components 17
To Next Page
Loading...
Need help?
General