4. Connect the power cable.
5. To ensure the module is operating properly, check the power supply module status LED.
Removing and replacing a fan module
WARNING:
To maintain the correct airflow to the HPE StoreOnce system, this procedure must be completed within
3 minutes.
Procedure
1. Press the fan module release buttons (1) and slide the module (2) out of the enclosure.
2. Slide the replacement fan module into the enclosure until it clicks into place
3. To ensure the module is operating properly, check the fan module status LEDs.
Removing and replacing a fan module 69
To Next Page
Loading...
Need help?
General