To Next Page

To Previous Page

action.

### END #######################################################################

Command Successful

HPresetpassword account

The purpose of the HPresetpassword account

The HPresetpassword account provides a method for the local Admin user to recover the Admin password

back to a default state.

• username = HPresetpassword

• default password = hpresetpassword

Best practice is to change the default password after installation.

This user account does not provide any access to StoreOnce functions or data that may already be on the

system.

Changing the password for the HPresetpassword account

Procedure

1. Gain access to the local system console either using a locally attached USB keyboard and monitor or via

the iLO remote console.

NOTE:

This account is not accessible via a remote ssh session.

2. At the Login prompt, type the username (HPresetpassword) and default password (hpresetpassword):

3. A list of available commands will be presented.

• reset: Reset the 'Admin' password to 'admin'

• manage: Change the 'HPresetpassword' user's password

• help: List available commands

• exit: Log out

4. Run the command manage to change the password for the HPresetpassword user. At the prompts,

provide:

a. (current) UNIX password: the default at installation is hpresetpassword.

b. New UNIX password: the new password must be strong and memorable. If it is weak, for example a

dictionary name, it will not be accepted.

c. Retype new UNIX password: re-enter the new password to confirm it

5. Type exit to log out.

6. Store the new password securely in an offline Password Security tool.

Resetting the password for the local Admin user

Procedure

1. Gain access to the local system console either using a locally attached USB keyboard and Monitor or via

iLO remote console.

2. At the Login prompt type: HPresetpassword

40 HPresetpassword account

HP StoreOnce 3100 User Manual

Other manuals for HP StoreOnce 3100