To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL180 and is the answer not in the manual?
General| Expansion Slots | Up to 6 PCIe 3.0 slots |
|---|---|
| Form Factor | 2U rack |
| Processor | Intel Xeon E5-2600 v4 series |
| Maximum Memory Capacity | 768GB |
| Storage | Up to 12 LFF or 24 SFF drives |
| Network | 2 x 1GbE ports |
| Storage Controller | HPE Smart Array controllers |
| RAID Support | RAID 0, 1, 5, 10, 50, 60 |
| Operating System Support | Microsoft Windows Server, VMware, Red Hat Enterprise Linux, SUSE Linux Enterprise Server |
Details on the components located on the front of the server.
Details on the components located on the rear of the server.
Identification of components on the server's system board.
Explanation of drive status LEDs and buttons for operational feedback.
Specific LED indicators and their meanings for NVMe SSDs.
Guides for performing the initial installation of the server.
Prerequisites and conditions for server operation.
Details on electrical power needs and considerations for the server.
Important safety warnings and cautions for server handling and operation.
Step-by-step instructions for physically installing the server in a rack.
Procedures for powering on the server.
Procedures for safely shutting down and powering off the server.
Instructions for safely removing the server from its rack mounting.
Steps for removing the server's access panel for internal access.
Guidelines and information for installing various types of server drives.
Detailed procedure for installing an NVMe drive into the server.
Information on supported storage controllers for the server.
Step-by-step guide for installing an HPE Smart Array controller.
Information and guidelines for installing memory modules (DIMMs).
Procedure for installing a DIMM into the server's memory slots.
Information on supported expansion boards and PCIe slot compatibility.
Detailed steps for installing expansion cards into PCIe slots.
Details and specifications for server power supply options.
Procedure for installing a redundant power supply unit.
Information on the HPE Trusted Platform Module 2.0 hardware option.
Guide for installing and enabling the TPM 2.0 hardware.
Details on the HPE Integrated Lights-Out 5 management processor.
Information on the server's embedded deployment and provisioning tool.
Overview of the system's Unified Extensible Firmware Interface utilities.
Procedures for maintaining the server's firmware and system ROM.
Methods for updating system firmware and ROM versions.
Using Non-Maskable Interrupts for system crash dump analysis.
References to guides and documents for resolving server issues.
Details on operating temperature and humidity ranges.
Technical specifications for various server power supply options.
Information on how to contact HPE support for assistance.
