HPE ProLiant DL180

3 UID LED Solid blue = Activated
Flashing blue:
• 1 flash per second = Remote
management or firmware
upgrade in progress
• 4 flashes per second = iLO
manual reboot sequence
initiated
• 8 flashes per second = iLO
manual reboot sequence in
progress
Off = Deactivated
4 Power supply LED Solid green = Normal
Off = One or more of the
following conditions exists:
• Power is unavailable
• Power supply failed
• Power supply is in standby
mode
• Power supply error
PCIe riser board slot definitions
The server ships with a primary PCIe riser cage installed and a secondary PCIe riser cage blank. A
second processor is required to support installation in the secondary PCIe riser location.
• Two-slot PCIe riser cage assembly: Install in the primary PCIe riser connector
Item Type Form factor Connector link
width
Negotiable link
width
1 PCIe 3.0 Full height, full length x16 16, 8, 4, 1
2 PCIe 3.0 Full height, full length x8 8, 4, 1
• Three-slot PCIe riser cage assembly: By default, installed in the primary PCIe riser connector
16 Component identification